TrundleBedShowroom
Shop Smart - Save Money® on trundle beds
Sat-Sun 5am-8pm PST
Fixing Leaks Around The Home
Being handy around the house doesn’t have to be difficult. Common types of leaks found in the home are worn toilet flappers, dripping faucets, and other leaking valves. These types of leaks are often easily correctable, in many cases requiring only a few tools and hardware that can pay for themselves in water savings.
The Facts On Leaks
- Leaks can account for, on average, 10,000 gallons of water wasted in the home every year, which is enough to fill a backyard swimming pool.
- The amount of water leaked from U.S. homes could exceed more than 1 trillion gallons per year. That's equivalent to the annual water use of Los Angeles, Chicago, and Miami combined.
- Ten percent of homes have leaks that waste 90 gallons or more per day.
- Common types of leaks found in the home include leaking toilet flappers, dripping faucets, and other leaking valves. All are easily correctable.
- Fixing easily corrected household water leaks can save homeowners more than 10 percent on their water bills.
- Keep your home leak-free by repairing dripping faucets, toilet valves, and showerheads. In most cases, fixture replacement parts don't require a major investment and can be installed by do-it-yourselfers.
- The vast majority of leaks can be eliminated after retrofitting a household with new WaterSense labeled fixtures and other high-efficiency appliances.
- A leaky faucet that drips at the rate of one drip per second can waste more than 3,000 gallons per year. A home with WaterSense labeled toilets could use that water to flush for six months!
- A showerhead leaking at 10 drips per minute wastes more than 500 gallons per year. That's enough water to wash 60 loads of dishes in your dishwasher.
Checking for Leaks
- To check for leaks in your home, first you need to determine whether you're wasting water, then identify the source of the leak.
- Take a look at your water usage during a colder month, such as January or February. If a family of four exceeds 12,000 gallons per month, there are serious leaks.
- Check your water meter before and after a two-hour period when no water is being used. If the meter changes at all, you probably have a leak.
- Identify toilet leaks by placing a drop of food coloring in the toilet tank. If any color shows up in the bowl after 15 minutes, you have a leak. (Be sure to flush immediately after the experiment to avoid staining the tank.)
- Examine faucet gaskets and pipe fittings for any water on the outside of the pipe to check for surface leaks.
- The Regional Water Providers Consortium has a video on detecting household leaks that you may find helpful.
Fix a Leak: Toilets
A common reason why toilets will leak is an old or worn out toilet flapper (sometimes called a "valve seal"). Flappers are inexpensive rubber parts that can build up minerals or decay over time. Replacing them can be a quick and easy fix for your water woes. To fix this leak, consult your local hardware store, home improvement retailer, or licensed plumber. Tip: Bring the old flapper to the hardware store for comparison to make sure you buy a new flapper that fits your toilet model. You can also check the owner’s manual, if you have it, or the manufacturer’s website for the appropriate replacement part number for the flapper.
Fix a Leak: Faucets
Old and worn faucet washers and gaskets frequently cause leaks in faucets. Many tutorials are available online for how to fix a wide variety of faucets. The Do-It-Yourself Network has a handy reference on faucet repairs. Tip: Don't forget to turn off the water line before you start!
Fix a Leak: Showerheads
Some leaky showerheads can be fixed by making sure there is a tight connection between the showerhead and the pipe stem and by using pipe tape to secure it. Pipe tape, also called Teflon tape, is available at most hardware stores, is easy to apply, and can help tame unruly leaks. For more complicated valve leaks in showers that drip when not in use, contact an experienced handyperson or licensed plumber. Tip: It's also a good idea to check and, if needed, replace the washer or "o" ring inside the showerhead while making this repair.
Fix a Leak: Outdoors
If you have an in-ground irrigation system, check it each spring before use to make sure it wasn't damaged by frost or freezing. Or hire a WaterSense irrigation partner to inspect it for you. These professionals have passed a certification program focused on water efficiency. They will not only help you detect and correct leaks in the system, but also maximize its efficiency.
Finally, check your garden hose for leaks at its connection to the spigot. If it leaks while you run your hose, replace the nylon or rubber hose washer and ensure a tight connection to the spigot using pipe tape and a wrench.
Leaks Still Flowing Overboard?
Have you done all that you can to try to eliminate leaks from your home but still can't nip that drip in the bud? If you've already determined you have leaks and you find these step-by-step solutions aren't enough to stop them, it might be time to replace your leaking fixtures. Look for the WaterSense label if you are considering a new toilet or faucet, you could increase your home's water efficiency.
Want to learn more? Click Here to read related articles. To learn more about the EPA's WaterSense program, visit: http://www.epa.gov/watersense/
http://www.trundlebedshowroom.com/articles/Fixing-Leaks-Around-The-Home_a394.html